Powertrain & Propulsion Test Stands
Powertrain & Propulsion Test Stands
High-accuracy, modular test stands for engines, e-motors, e-axles, transmissions, and complete drivetrains. Built for automotive, aerospace, and general industry applications—covering R&D, durability, and end-of-line testing. Every system is engineered for precision, safety, and repeatability, backed by a 3-year warranty and global service support.
Why Choose Us
- One partner, full system: From mechanical rig and dynamometer to safety, drives, DAQ, HIL, automation, and reporting.
- Modular by design: Start with a base rig, then expand with torque ranges, environmental options, NVH or EOL automation.
- Certified compliance: CE/UKCA, UL, ISO safety standards, and aerospace test specifications where required.
- 3-year warranty: Industry-leading coverage on all equipment.
- Open architecture: Supports Siemens, Rockwell, NI, HBK, MATLAB/Simulink, dSPACE—no vendor lock-in.
- Service everywhere you need it: Installation, commissioning, calibration, predictive maintenance, and AR-enabled remote support.
Automotive & mobility
CE, hybrid and EV propulsion systems, transmissions, driveline durability, EOL.
Industries & applications
Aerospace
Auxiliary power units, starter-generators, fuel pumps, e-motors, gearboxes, actuation systems—tested for performance and certification.
General industry
Pumps, fans, compressors, industrial gearboxes, rotating equipment—performance mapping, reliability, and NVH
What We Deliver
We offer a range of solutions to meet your needs. Our test rigs are designed to provide precision and reliability in various applications, giving you confidence in every test. Here’s what you can expect from us:
ICE systems
- Engine dynos, torque converter and transmission rigs.
E-propulsion:
- E-motor, inverter and e-axle rigs—efficiency maps, torque/speed, thermal cycling
Hybrid
- PHEV/HEV rigs with battery simulation, regenerative braking, shift quality
Aerospace propulsion & auxiliaries
- Long-cycle durability, efficiency testing, thermal and vibration qualification
Component test
- Bearings, gears, shafts, pumps, CV joints, clutches
End-of-line
- Automated pass/fail testing with full traceability
Typical System Architecture
Load & actuation
Eddy-current / AC / PM dynos, torque transducers, shift/park actuation, brake simulation
Power electronics
4-quadrant drives, regenerative supplies, high-voltage battery simulators
Sensing & DAQ
Torque, speed, vibration, strain, pressure, thermal sensors, synchronous timestamping
Control & automation
PLC/IPC control, safety PLC, HIL interface (CAN, LIN, FlexRay, EtherCAT)
Software
Recipe-based test plans, dashboards, automated reporting
Safety
Guarding, interlocks, SIL/PL risk reduction, fire suppression options
Test Capabilities
Torque/speed maps, efficiency islands, coast-down
Endurance cycles, load spectra, thermal cycling
Gearshift timing, synchro analysis, clutch control
Motor/inverter tuning, sensor correlation
Order tracking, torsional vibration, gear whine, aerospace acoustic qualification
Leakage, drag torque, current draw, vibration, backlash, efficiency thresholds
Options and Upgrades Available
- Aerospace-grade instrumentation and calibration protocols
- High-voltage battery simulators and charging interfaces
- Environmental chambers (−40…+180 °C), altitude, humidity
- Oil/coolant conditioning skids with precise control
- Robotic/gantry loading for high-volume EOL
- Acoustic test hoods, torsional accelerometers, high-speed encoders
- IT integration: MES, ERP, secure cloud or on-prem data storage
Compliance Standards Overview
Safety
ISO 12100, ISO 13849-1, IEC 62061, IEC 60204-1
EMC
EN/IEC 61000 series
Aerospace standards
Data integrity and traceability for DO-160 and equivalent requirements
Calibration
ISO/IEC 17025-aligned calibration for torque, speed, temperature, pressure
Example Configurations
Automotive E-Axle Rig
Up to 25,000 rpm, 0–6,000 Nm, 800 V battery simulator, NVH package
Aerospace starter-generator test stand
0–30,000 rpm, high-frequency inverter simulation, thermal conditioning
Industrial gearbox rig
Up to 2 MW loading, long-term endurance cycles, acoustic analysis
Transmission development rig
Dual-dyno, shift robot, gearshift analytics, clutch pressure contro