Product Finder
Rotor Type
Configuration Type
Grinding Wheel Balancer
Grinding wheel balancers are available as static (non-rotating) machines or as vertical rotating systems, depending on the application and production requirements. These machines are often used for audit purposes only, but for certain applications correction may be required
Contact Sales
Aircraft Wheel Balancer
Aircraft wheels, tires and braking systems are typically balanced on vertical non-rotating balancing machines because they allow for ease of loading and measure very quickly. See static balancers for more information about the machine configuration. The machines can be equipped for spindle lock-outs for heavier components during loading which protect the machine and reduce settle […]
Contact Sales
Turbine Balancers
Turbine balancers are designed for ultra-high accuracy applications due to the critical nature of the components being balanced. Turbine wheels are typically balanced on vertical machines, while full turbine rotors or rotor assemblies are processed on horizontal machines. Systems are supplied with either manual or automatic safety guarding.
Contact Sales
Flywheel Balancers
Flywheel balancers are typically vertical balancing machines, providing stable mounting and accurate measurement for a wide range of flywheel sizes, from small passenger vehicle parts through to large industrial flywheels.
Contact SalesPulley Balancers
Pulley balancers are normally configured as vertical machines, supplied with full guarding or integrated directly into a production cell. They provide accurate and repeatable results for V-groove, poly-V, timing, and flat pulleys used across industrial and automotive applications.
Contact Sales
Fan Balancers
Fan balancing machines can be configured as horizontal, vertical, or static systems, depending on the fan design, the number of balancing planes required, and the production volume. Selection can also be influenced by windage effects when the fan is spun at speed.
Contact SalesClutch Balancer
Clutch balancers are designed as vertical machines, typically configured for rotating operation but available in non-rotating formats where required. These machines are capable of handling both clutch discs and pressure plates, delivering the accuracy demanded by automotive OEMs, commercial vehicle suppliers, and high-performance aftermarket applications.
Contact Sales
Brake Rotor Balancers
Brake balancing machines are typically configured as vertical systems, designed specifically for automotive and commercial vehicle brake rotors, drums, and hubs. These machines provide fast, precise, and repeatable results, making them ideally suited for OEM production environments as well as aftermarket specialists.
Contact SalesSpindle Balancers
Spindle balancers are typically configured as horizontal belt-drive machines, delivering the highest possible measurement accuracy. The setup allows fast changeover for any type of spindle, from small high-speed spindles to large industrial designs. Each machine can also be adapted to run the spindle in its own bearings where required, providing a true in-situ balance representative […]
Contact SalesImpeller Balancers
impeller balancers are engineered to handle the full range of pump and fan impellers, from small single-stage designs to large multi-stage units. Horizontal machines are typically used for multi-stage and two-plane pump impellers, while vertical machines are often selected for impellers requiring correction in a single plane.
Contact Sales
Electric Motor Balancers
Electric motor balancing machines are designed to handle both individual motor rotors and complete motor assemblies. Standard rotors are usually balanced on horizontal belt-drive machines, while disc-type axial flux rotors may be better suited to vertical machines depending on configuration. For entire motors, custom table-type balancing systems are used, with the motor driving itself during […]
Contact Sales
Driveshaft Balancers
Driveshafts require multi-plane dynamic balancing to eliminate vibration, extend bearing life, and ensure smooth performance. Our range of driveshaft balancing machines covers:
Contact Sales
Crankshaft Balancer
Crankshaft balancers are built as horizontal machines, available in single-station or two-station formats depending on production volume. The most flexible configuration is a belt drive system, while high-volume automotive applications often use end-drive systems for maximum precision and throughput.
Contact SalesBlower Balancers
Blower balancers are available in horizontal, vertical, or static (non-rotating) configurations, depending on the type and size of blower being processed. This flexibility allows the same machine platform to handle everything from small axial blowers to large centrifugal or mixed-flow units.
Contact Sales
Axle Balancers
Our axle balancing machines are purpose-built systems designed to handle all configurations, including RDM/RDU, FDU, beam axles, and third members. They can be supplied for horizontal or vertical axis balancing, and are capable of working with the full axle case, half cases, or back sections removed depending on production requirements. For high-volume applications, they are […]
Contact Sales
Armature Balancer
Our armature balancers are designed as horizontal machines, capable of handling everything from small armatures used in automotive applications, such as window motors, to larger generator rotors. They can be configured with a variety of belt-drive options, ranging from simple manual to automatic engaging. They are always supplied with appropriate safety guarding, or integrated into […]
Contact Sales